video
SF6 Density Relay Tester

SF6 Density Relay Tester

This SF6 Density Relay Tester is an intelligent SF6 gas density relay calibration instrument. Using high-precision pressure sensors and high-speed A/D converters, combined with a 32-bit high-performance microprocessor, it can perform performance verification on various SF6 gas density relays and accurately measure the pressure value at the current temperature when the signal is activated

Présentation du produit

 

The SF6 density relay calibrator is indispensable for ensuring the safety of high-voltage SF6 equipment. By accurately simulating gas density states, it verifies relay functionality (alarm/lockout) with high efficiency. Its intelligence, portability, and precision make it vital for modern power system maintenance, preventing failures and enhancing grid reliability.

 

HTY0672

 

 

1. Ensure equipment safety: Density relays are key protective components of SF6 equipment. If it fails (such as alarm/lockout value drift, contact adhesion/refusal to move), it may cause the equipment to continue running or operating in the event of gas leakage or insufficient insulation, which can easily lead to major safety accidents (such as arc explosions).

2. Ensure power supply reliability: Accurate alarms can enable operation and maintenance personnel to detect leaks in a timely manner, avoiding unplanned shutdowns caused by insulation degradation of equipment.

3. Extend equipment life: Timely handling of leaks and supplementing qualified SF6 gas are the foundation for maintaining long-term stable operation of equipment.

4. Compliance with regulatory requirements: Relevant operation and maintenance regulations in the power industry (such as DL/T 596 "Preventive Testing Regulations for Power Equipment") clearly stipulate that SF6 density relays need to be calibrated regularly (usually 1-4 years) or on suspicion of failure.

5. Verify new equipment: Newly installed or replaced density relays should be calibrated before being put into operation.

 

 

274

 

 

1. High precision: The accuracy of core pressure sensors is usually better than 0.1% FS, and the temperature measurement accuracy is better than ± 0.5 ℃ C.

2. Portability: Most designs are portable, suitable for on-site use, and powered by built-in batteries.

3. Intelligence: Built in microprocessor, automatically calculates temperature compensation, controls pressure, detects nodes, stores data, and generates reports.

4. Safety: It is usually designed to not require the operator to come into contact with SF6 gas itself. The calibrator is connected to the test port of the calibrated relay through a valve, forming a closed test gas path. The test medium is usually clean and dry air or nitrogen (oxygen or flammable gases are strictly prohibited!). This avoids the risks that SF6 gas may bring (although pure SF6 is non-toxic, arc decomposition products are harmful; And SF6 is a strong greenhouse gas.

5. Multi functional interface: Suitable for density relays from different manufacturers and interfaces.

6. User friendly: graphical interface, clear operation process.

 

 

The maintenance department of power companies (power plants, substations).

The quality inspection department of high-voltage electrical equipment (GIS, circuit breakers, transformers, etc.) manufacturers.

Electric power engineering installation and commissioning company.

Third party testing/calibration laboratory.

 

étiquette à chaud: sf6 density relay tester, China sf6 density relay tester manufacturers, suppliers, factory, Kit de test d'huile pour utilitaire électrique, Testeur de propriétés de l'huile de transformateur

Envoyez demande

whatsapp

Téléphone

Messagerie

Enquête

sac